View LSE655_720658.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Power TOPLED with Lens Hyper-Bright LED LS E655
Vorlaufige Daten / Preliminary Data
Besondere Merkmale * Gehausetyp: weies P-LCC-4-Gehause * Besonderheit des Bauteils: fokussierte Abstrahlung in SMT-Technologie; hohe Helligkeit in Achsrichtung * Wellenlange: 632 nm (super-rot) * Abstrahlwinkel: 60 * Technologie: InGaAlP * optischer Wirkungsgrad: 12 lm/W * Gruppierungsparameter: Lichtstarke, Durchflussspannung * Verarbeitungsmethode: fur alle SMT-Bestucktechniken geeignet * Lotmethode: IR Reflow Loten und Wellenloten (TTW) * Vorbehandlung: nach JEDEC Level 2 * Gurtung: 12-mm Gurt mit 2000/Rolle, o330 mm * ESD-Festigkeit:ESD-sicher bis 2 kV nach EOS/ESD-5.1-1993 Anwendungen * Ampelanwendung * Hinterleuchtung (LCD, Schalter, Tasten, Displays, Werbebeleuchtung) * Innen- und Auenbeleuchtung im Automobilbereich (z.B. Instrumentenbeleuchtung und Bremslichter) * Ersatz von Kleinst-Gluhlampen * Markierungsbeleuchtung (z.B. Stufen, Fluchtwege, u.a.) * Signal- und Symbolleuchten Features * package: white P-LCC-4 package * feature of the device: focussed radiation in SMT technology; high brightness in beam direction * wavelength: 632 nm (super-red) * viewing angle: 60 * technology: InGaAlP * optical efficiency: 12 lm/W * grouping parameter: luminous intensity, forward voltage * assembly methods: suitable for all SMT assembly methods * soldering methods: IR reflow soldering and TTW soldering * preconditioning: acc. to JEDEC Level 2 * taping: 12-mm tape with 2000/reel, o330 mm * ESD-withstand voltage: up to 2 kV acc. to EOS/ESD-5.1-1993
Applications * traffic lights * backlighting (LCD, switches, keys, displays, illuminated advertising) * interior and exterior automotive lighting (e.g. dashboard backlighting and brake lights) * substitution of micro incandescent lamps * marker lights (e.g. steps, exit ways, etc.) * signal and symbol luminaire
2001-03-05
1
LS E655
Typ Emissionsfarbe Color of Emission Farbe der Lichtaustrittsflache Color of the Light Emitting Area colorless clear Lichtstarke Lichtstrom Bestellnummer
Type
Luminous Intensity IF = 50 mA IV (mcd) 560 ...1400
Luminous Flux IF = 50 mA V (mlm) 1150 (typ.)
Ordering Code
LS E655-U2AA-11
super-red
Q62703-Q5996
Anm.: -11 gesamter Farbbereich (siehe Seite 4) -11 gesamter Durchlassspannungsbereich, Lieferung in Einzelgrupppen (siehe Seite 5) Die Standardlieferform von Serientypen beinhaltet eine untere bzw. eine obere Familiengruppe, die aus nur 3 bzw. 4 Halbgruppen besteht. Einzelne Halbgruppen sind nicht erhaltlich. In einer Verpackungseinheit / Gurt ist immer nur eine Halbgruppe enthalten. Note: -11 Total color tolerance range (please see page 4) -11 Total forward voltage tolerance, delivery in single groups (see page 5) The standard shipping format for serial types includes a lower or upper family group of 3 or 4 individual groups. Individual half groups are not available. No packing unit / tape ever contains more than one luminous intensity half group.
2001-03-05
2
LS E655
Grenzwerte Maximum Ratings Bezeichnung Parameter Betriebstemperatur Operating temperature range Lagertemperatur Storage temperature range Sperrschichttemperatur Junction temperature Durchlassstrom Forward current Stostrom Surge current t 10 s, D = 0.1 Sperrspannung Reverse voltage Leistungsaufnahme Power consumption TA 25 C Symbol Symbol Wert Value - 40 ... + 100 - 40 ... + 100 + 125 70 0.1 Einheit Unit C C C mA A
Top Tstg Tj IF IFM
VR Ptot
5 180
V mW
Warmewiderstand Thermal resistance Rth JA Sperrschicht/Umgebung Junction/ambient Rth JS Sperrschicht/Lotpad Junction/soldering point Montage auf PC-Board FR 4 (Padgroe 16 mm 2) mounted on PC board FR 4 (pad size 16 mm 2)
300 130
K/W K/W
2001-03-05
3
LS E655
Kennwerte (TA = 25 C) Characteristics Bezeichnung Parameter Wellenlange des emittierten Lichtes Wavelength at peak emission IF = 50 mA Dominantwellenlange 1) Dominant wavelength IF = 50 mA Spektrale Bandbreite bei 50 % Irel max Spectral bandwidth at 50 % Irel max IF = 50 mA Abstrahlwinkel bei 50 % IV (Vollwinkel) Viewing angle at 50 % IV Durchlassspannung 2) Forward voltage IF = 50 mA Sperrstrom Reverse current VR = 5 V Temperaturkoeffizient von peak Temperature coefficient of peak IF = 50 mA; -10C T 100C Temperaturkoeffizient von dom Temperature coefficient of dom IF = 50 mA; -10C T 100C Temperaturkoeffizient von VF Temperature coefficient of VF IF = 50 mA; -10C T 100C Optischer Wirkungsgrad Optical efficiency IF = 50 mA
1)
Symbol Symbol (typ.)
Wert Value 645
Einheit Unit nm
peak dom
(typ.)
633 6 16
nm
(typ.)
nm
(typ.) (typ.) (max.) (typ.) (max.) (typ.)
2
60 2.1 2.5 0.01 10 0.15
Grad deg. V V
VF VF IR IR TCpeak
A A
nm/K
(typ.)
TCdom
0.04
nm/K
(typ.)
TCV
- 3.4
mV/K
(typ.)
opt
12
lm/W
Wellenlangen werden mit einer Stromeinpragedauer von 25 ms und einer Genauigkeit von 1 nm ermittelt. Wavelengths are tested at a current pulse duration of 25 ms and a tolerance of 1 nm. Durchlassspannungsgruppen werden mit einer Stromeinpragedauer von 1 ms und einer Genauigkeit von 0.1 V ermittelt. Forward voltage groups are tested at a current pulse duration of 1 ms and a tolerance of 0.1 V.
2)
2001-03-05
4
LS E655
2)
Durchlassspannungsgruppen Forward voltage groups
Gruppe Group 3 4
Durchlassspannung Forward voltage min. 1.90 2.20 max. 2.20 2.50
Einheit Unit V V
Helligkeits-Gruppierungsschema Luminous Intensity Groups Lichtgruppe Luminous Intensity Group U2 V1 V2 AA Lichtstarke Luminous Intensity IV (mcd) 560 ... 710 710 ... 900 900 ... 1120 1120 ... 1400 Lichtstrom Luminous Flux V (mlm) 760 (typ.) 960 (typ.) 1200 (typ.) 1500 (typ.)
Helligkeitswerte werden mit einer Stromeinpragedauer von 25 ms und einer Genauigkeit von 11% ermittelt. Luminous intensity is tested at a current pulse duration of 25 ms and a tolerance of 11%.
Gruppenbezeichnung auf Etikett Group Name on Label Beispiel: V2-13 Example: V2-13 Lichtgruppe Luminous Intensity Group V Halbgruppe Half Group 2 Wellenlange Wavelength 1 Durchlassspannung Forward Voltage 3
2001-03-05
5
LS E655
Relative spektrale Emission Irel = f (), TA = 25 C, IF = 50 mA Relative Spectral Emission V() = spektrale Augenempfindlichkeit Standard eye response curve
100
OHL01486
Irel
% 80
V
60
super-red
40
20
0 400
450
500
550
600
650
nm
700
Abstrahlcharakteristik Irel = f () Radiation Characteristic
40 30 20
10
0 1.0
OHL00732
50 0.8 60
0.6
70
0.4
80 90
0.2 0
100
1.0
0.8
0.6
0.4
0
6
20
40
60
80
100
120
2001-03-05
LS E655
Durchlassstrom IF = f (VF) Forward Current TA = 25 C
10 2
OHL00444
Relative Lichtstarke IV/IV(50 mA) = f (IF) Relative Luminous Intensity TA = 25 C
10 1
OHL00437
IF mA
10 1 5
IV
V (50 mA)
10 0 5
10 0 5
10 -1 5
10 -1 5
10 -2 5
10 -2 1.4
1.6
1.8
2.0
2.2 V 2.4
10 -3 -1 10
5 10 0
5 10 1
mA 10 2
VF
Maximal zulassiger Durchlassstrom IF = f (T) Max. Permissible Forward Current
80 mA IF 70 60
OHL01413
IF
Relative Lichtstarke IV/IV(25 C) = f (TA) Relative Luminous Intensity IF = 50 mA
IV I V(25 C)
1.4 1.2 1.0 0.8
OHL0163
TA
50 40
TS
super-red
0.6
30 20 10 0
A temp. ambient S temp. solder point
0.4 0.2 0 -20
0
20
40
60
80 C 100
0
20
40
60
C 1
T
2001-03-05 7
TA
LS E655
Zulassige Impulsbelastbarkeit IF = f (tp) Permissible Pulse Handling Capability Duty cycle D = parameter, TA = 25 C
0.12 A
OHL01505
Zulassige Impulsbelastbarkeit IF = f (tp) Permissible Pulse Handling Capability Duty cycle D = parameter, TA = 85 C
0.12 A
OHL01506
IF
0.1 0.005 0.05 0.5
IF
0.10
0.08
0.08
0.06
0.06
0.005 0.05 0.5
0.04
0.04
0.02
0.02
0 -5 10 10-4 10-3 10-2 10-1 100 101 s 102
0 -5 10 10-4 10-3 10-2 10-1 100 101 s 102
tp
tp
2001-03-05
8
LS E655
Mazeichnung Package Outlines
3.0 (0.118) 2.6 (0.102) 2.3 (0.091) 2.1 (0.083) 0.8 (0.031) A 0.6 (0.024) C
3.5 (0.138) max. 2.1 (0.083) 1.7 (0.067) 0.9 (0.035) 0.7 (0.028)
41
o2.60 (0.102)
0.18 (0.007) 0.13 (0.005) 0.6 (0.024) 0.4 (0.016)
0.1 (0.004) typ
1.1 (0.043)
Package marking
0.5 (0.020)
C
C
Mae werden wie folgt angegeben: mm (inch) / Dimensions are specified as follows: mm (inch).
Gewicht / Approx. weight: 38 mg
2001-03-05
9
o2.55 (0.100)
GPLY7000
3.4 (0.134) 3.0 (0.118)
3.7 (0.146) 3.3 (0.130)
LS E655
Lotbedingungen Vorbehandlung nach JEDEC Level 2 Soldering Conditions Preconditioning acc. to JEDEC Level 2
IR-Reflow Lotprofil (nach IPC 9501) IR Reflow Soldering Profile (acc. to IPC 9501)
300 C
OHLY0597
T
250
240-245 C 10-40 s 183 C 120 to 180 s Ramp-down rate up to 6 K/s Defined for Preconditioning: up to 6 K/s Ramp-up rate up to 6 K/s
200
150
100
50 Defined for Preconditioning: 2-3 K/s 0 0 50 100 150 200 s 250
t
2001-03-05
10
LS E655
Wellenloten (TTW) TTW Soldering (nach CECC 00802) (acc. to CECC 00802)
OHLY0598
300 C T 250 235 C ... 260 C
10 s
Normalkurve standard curve 2. Welle 2. wave Grenzkurven limit curves
200 1. Welle 1. wave 150 100 C ... 130 C 100 2 K/s 50 Zwangskuhlung forced cooling ca 200 K/s 5 K/s 2 K/s
0 0 50 100 150 t 200 s 250
2001-03-05
11
LS E655
Empfohlenes Lotpaddesign Recommended Solder Pad IR Reflow Loten IR Reflow Soldering
3.3 (0.130) 2.6 (0.102) 1.1 (0.043)
3.3 (0.130) 0.4 (0.016)
1.5 (0.059)
0.5 (0.020)
Kathoden Markierung / Cathode marking Lotstoplack Solder resist
12
4.5 (0.177)
Padgeometrie fur verbesserte Warmeableitung Paddesign for improved heat dissipation
_ Cu Flache / < 12 mm 2 per pad Cu-area
7.5 (0.295)
OHLPY439
Mae werden wie folgt angegeben: mm (inch) / Dimensions are specified as follows: mm (inch).
2001-03-05
LS E655
Empfohlenes Lotpaddesign Recommended Solder Pad Wellenloten (TTW) TTW Soldering
3.5 (0.138)
3.5 (0.138)
2.8 (0.110)
2 (0.079)
6.1 (0.240)
1.5 (0.059) Bewegungsrichtung der Platine PCB-direction
OHAY0583
2 (0.079)
6 (0.236)
8 (0.315)
3 (0.118)
2 (0.079)
1 (0.039)
2.8 (0.110) Padgeometrie fur verbesserte Warmeableitung Paddesign for improved heat dissipation
0.5 (0.020)
7.5 (0.295) Cu Flache / > 12 mm 2 per pad Cu-area Lotstoplack Solder resist
Mae werden wie folgt angegeben: mm (inch) / Dimensions are specified as follows: mm (inch).
Gurtung / Polaritat und Lage Verpackungseinheit 2000/Rolle, o330 mm Method of Taping / Polarity and Orientation Packing unit 2000/reel, o330 mm
4 (0.157) 1.5 (0.059) 2 (0.079) CC
1.75 (0.069)
3.8 (0.150)
5.5 (0.217)
12 (0.472)
CA
3 (0.118) 8 (0.315)
OHAY0734
Mae werden wie folgt angegeben: mm (inch) / Dimensions are specified as follows: mm (inch).
2001-03-05
13
LS E655
Revision History: 2001-03-05 Previous Version: Page 2001-03-05 Subjects (major changes since last revision)
Published by OSRAM Opto Semiconductors GmbH & Co. OHG Wernerwerkstrasse 2, D-93049 Regensburg (c) All Rights Reserved. Attention please! The information describes the type of component and shall not be considered as assured characteristics. Terms of delivery and rights to change design reserved. Due to technical requirements components may contain dangerous substances. For information on the types in question please contact our Sales Organization. If printed or downloaded, please find the latest version in the Internet. Packing Please use the recycling operators known to you. We can also help you - get in touch with your nearest sales office. By agreement we will take packing material back, if it is sorted. You must bear the costs of transport. For packing material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs incurred. Components used in life-support devices or systems must be expressly authorized for such purpose! Critical components 1 may only be used in life-support devices or systems 2 with the express written approval of OSRAM OS. 1 A critical component is a component used in a life-support device or system whose failure can reasonably be expected to cause the failure of that life-support device or system, or to affect its safety or the effectiveness of that device or system. 2 Life support devices or systems are intended (a) to be implanted in the human body, or (b) to support and/or maintain and sustain human life. If they fail, it is reasonable to assume that the health of the user may be endangered.
2001-03-05
14

▲Up To Search▲

Price & Availability of LSE655

	To Download LSE655 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .